For 1990-2009 cars only
Tools Required
| • | J 38868 Lower Gear Unit Assembly Remover/Installer |
| • | J 6129 Handle |
| • | J 28585 Snap Ring Remover |
- Attach the J 38868 and the J 6129 onto the main shaft.
- Align the bolt hole in the center support with the bolt hole in the case and carefully lower the gear unit assembly (640-672) into the case.
- Remove the tools.
- Install the center support retaining ring (633) using the J 28585 . The end gap of the retaining ring (633) should be located at the nine o'clock position with the beveled edge of the retaining ring facing up.
