REUSABLE BOTTOM PAN SEAL FOR 4L80-E/4L80-EHD (SMU)

Subject: REUSABLE BOTTOM PAN SEAL

Model and Year: 1991-92 C/K, RN, G AND P3 TRUCK WITH 4L80-E/4L80-EHD AUTOMATIC TRANSMISSION

TRANSMISSION APPLICATIONS: SUBJECT: 1991-92 HYDRA-MATIC 4L80- Reusable Bottom Pan Seal E/4L80-EHD (MT-1) (Service Manual Information)

TRANSMISSION MODELS: VEHICLE APPLICATIONS: All Models C/K, R/V, and P- Trucks, G-Van

Service Information: (Figure 1) -------------------------------- The HYDRA-MATIC 4L80-E transmission bottom pan seal (29) is REUSABLE. When removing the bottom pan (28), it is recommended to inspect the seal for any possible leak points that may cause future concerns:

o Tears in the rubber bead. o Missing torque limiters or washers. o Broken carrier seal.

If no signs have been found, then clean off seal with a clean soft cloth. Clean case and pan areas with part solvent before reinstalling seal.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.