STABILIZER BAR LINK NUT COMES LOOSE OR IS LOST (REPLACEMENT)

Subject: STABILIZER BAR LINK NUT COMES LOOSE OR IS LOST

Model and Year: 1992KTRUCKS

The stabilizer bar link on some 1992 Kl, K2, and K3 trucks may come loose or be missing. The condition is caused by the santoprene grommets used on the 1992 K model stabilizer bar links. The santoprene grommets, which are used to isolate the link bolts from the lower control arm, may cause a low clamp load of the free spinning nut to the bar link.

The condition can be corrected by installing a stabilizer bar link that has urethane grommets. This material was utilized during the 1991 Model year, before being changed to santoprene in 1992. The new nut should be tightened to full torque and Loctite (R) or equivalent should be used to insure a secure fit. If this condition has occurred, check the axle half shaft boots for damage. If they are damaged replace and use the appropriate labor operation. The urethane grommets are being used in production beginning with the start of the 1993 Model year.

SERVICE PROCEDURE:

1. Raise the vehicle and support it with suitable safety stands. 2. Remove the nut, spacer, and link bolt. 3. Install new link bolt, new spacer, and nut. 4. Tighten nut to a torque of 18N.m (13 1bs. ft.). 5. Lower the vehicle.

SERVICE PARTS INFORMATION

Part Number Description Application Quantity

15661496 Stabilizer bar/ All K Models 2 per truck link kit.(Includes 1 link-bolt, 1 nut, and 1 spacer.)

Parts are currently available from GMSPO.

WARRANTY INFORMATION For vehicles repaired under warranty use:

Labor Operations: T7576 T7577 T7581 right left both Labor Time: .5 .5 .9

Note: Labor Operation coded to base vehicle coverage in the warranty system.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.