Steering Shaft, Lower Bearing, and Jacket - Disassemble - Off Vehicle for Chevrolet Chevy K Pickup - 4WD 1998

Steering Shaft, Lower Bearing, and Jacket - Disassemble - Off Vehicle Column Shift

1. Remove the lock module assembly. Refer to Electronic Column Lock Module - Disassemble - Off Vehicle Electronic Column Lock Module - Disassemble (Column Shift).
2. Remove the turn signal. Refer to Turn Signal and Multifunction Switch Assembly - Disassemble - Off Vehicle Turn Signal and Multifcn Sw Assembly - Disassemble (Column Shift).



3. Remove the electrical BTSI actuator.
4. Use a screwdriver to pry the electrical BTSI actuator from the steering column jacket assembly.



5. Remove the 3 flat head 6-lobed socket tapping screws (2).
6. Remove the park lock cable assembly (3).
7. Remove the gearshift lever assembly support bracket (1).



8. Remove the steering column seal (3).
9. Remove the adapter and bearing assembly (2).
10. Remove the lower steering shaft (1).

Steering Shaft, Lower Bearing, and Jacket - Disassemble - Off Vehicle Floor Shift

1. Remove the lock module assembly. Refer to Electronic Column Lock Module - Disassemble - Off Vehicle Electronic Column Lock Module - Disassemble (Floor Shift).
2. Remove the turn signal. Refer to Turn Signal and Multifunction Switch Assembly - Disassemble - Off Vehicle Turn Signal and Multifcn Sw Assembly - Disassemble (Floor Shift).



3. Remove the steering column seal (3).
4. Remove the adapter and bearing assembly (2).
5. Remove the lower steering shaft (1).