GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1999 🢒 Chevy K Pickup - 4WD 🢒 Body and Accessories 🢒 Bumpers 🢒 Front Bumper Filler Replacement

Removal Procedure

    Object Number: 264998 Size: SH
  1. Remove the grille. Refer to Grille Replacement in Exterior Trim.
  2. Remove the filler panel to the fender bolts (2).
  3. Remove the filler side panel (3).

Installation Procedure

    Object Number: 264998 Size: SH
  1. Install the filler side panel (3).

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the filler side panel to the fender bolts (2).
  3. Install the grille. Refer to Grille Replacement in Exterior Trim.

    4. Tighten
    Tighten the license plate bracket to the bumper bolts to 13 N·m (115 lb in).