GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1999 🢒 Chevy K Pickup - 4WD 🢒 Body and Accessories 🢒 Bumpers 🢒 Front License Plate Bracket Replacement

Removal Procedure

    Object Number: 265001 Size: SH
  1. Remove the license plate bracket (3) to the bumper bolts (4) and nuts (1).
  2. Remove the license plate bracket (3).

Installation Procedure

    Object Number: 265001 Size: SH
  1. Install the license plate bracket (3).

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the license plate bracket to the bumper bolts (4) and nuts (1).

    3. Tighten
    Tighten the bumper bolts to 13 N·m (115 lb in).