For 1990-2009 cars only
Removal Procedure
- Rotate the I/P assembly forward. Refer to Instrument Panel Assembly Replacement in Instrument Panel, Gauges and Console.
- Untape the inversion module green box(1) that is secured to the wiring harness to allow access.
- Open the inversion module door and remove the circuit board.
- Remove the inversion module circuit board(1) from the vehicle.
Important: The green box is not replacable, Only the circuit board inside the box is serviceable.
Installation Procedure
- Install the inversion module circuit board(1) into the green box and close the cover.
- Resecure the inversion module green box(1) to the wiring harness in its original position.
- Reinstall the I/P by rotating back to its original position. Refer to Instrument Panel Assembly Replacement in Instrument Panel, Gauges and Console.
