Control Assembly Replacement - Auxiliary Suburban
Removal Procedure
- Remove
the bezel
- Remove the control assembly from the roof panel.
- Disconnect the electrical harness from the control assembly.
Installation Procedure
- Connect
the electrical harness to the
control assembly.
- Install the control assembly to the roof panel.
- Install the bezel.
- Test the circuit operation.
Control Assembly Replacement - Auxiliary 4-Door Utility
Removal Procedure
- Remove the bezel
- Remove the control assembly from the roof panel.
- Disconnect the electrical harness from the control assembly.
Installation Procedure
- Connect the electrical harness to the
control assembly.
- Install the control assembly to the roof panel.
- Install the bezel.
- Test the circuit operation.