GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1999 🢒 Chevy K Pickup - 4WD 🢒 Body and Accessories 🢒 Body Rear End 🢒 Pickup Box Endgate Liner Replacement

Removal Procedure

    Object Number: 389541 Size: SH
  1. Remove the screws (1) from the endgate liner.
  2. Remove the endgate liner (2) from the vehicle.

Installation Procedure

    Object Number: 389541 Size: SH
  1. Install the endgate liner (2) into the vehicle.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the screws (1) into the endgate liner.

    3. Tighten
    Tighten the endgate liner screws to 2 N·m (18 lb in).