Removal Procedure
- Remove the intake manifold. Refer to
Intake Manifold Replacement
.
- Remove the oil pump drive bolt.
- Remove the oil pump drive.
- Clean and inspect the oil pump drive. Refer to
Oil Pump Drive Cleaning and Inspection
.
Installation Procedure
- Apply grease to the oil pump drive gear for ease of assembly.
- Line up the oil pump drive, making sure that the oil pump is fully seated in the engine block.
Notice: Refer to Fastener Notice in the Preface section.
Notice: Ensure both components are aligned correctly or serious engine damage
will occur.
- Install the oil pump, making sure that the oil pump drive is fully seated in the engine block.
Tighten
Tighten the bolt to 25 N·m (18 lb ft).
- Install the intake manifold. Refer to
Intake Manifold Replacement
.