- Install the thermostat (3)
with the seal into the coolant crossover (7).
- Install the water outlet (1).
Notice: Refer to Fastener Notice in the Preface section.
- Install the water outlet bolts (2).
Tighten
Tighten the water outlet bolts to 30 N·m (22 lb ft).
- Place the coolant crossover
gaskets and the coolant crossover in position.
- Install the coolant crossover bolts.
Tighten
Tighten the coolant crossover bolts to 50 N·m (37 lb ft).
- Install the thermostat
bypass hose clamps onto the thermostat bypass hose.
- Install the thermostat bypass hose.
Important: Properly position the bypass hose clamps to avoid water pump pulley
interference.
- Position the thermostat bypass hose clamps.
- Install the drive belt
tensioner.
- Install the drive belt tensioner bolts.
Tighten
Tighten the drive belt tensioner bolts to 50 N·m (37 lb ft).