Important: Clean all the fuel and evaporative emission (EVAP) pipe connections and surrounding areas before disconnecting the pipes in order to avoid possible fuel/EVAP system contamination.

1. Remove the fuel tank. Refer to Fuel Tank Replacement .
2. Disconnect and remove the EVAP pipe (1) from the roll over valve, sending unit and retaining clip.
3. Cap the fuel and EVAP pipes in order to prevent possible fuel/EVAP system contamination.

1. Remove the caps from fuel and EVAP pipes.
2. Install and connect the EVAP pipe (1) to the roll over valve, sending unit, and retaining clip.
3. Install the fuel tank. Refer to Fuel Tank Replacement .