Removal Procedure
- Remove the sending unit. Refer to
Fuel Sender Assembly Replacement
.
- Disconnect the fuel pump electrical connector.
- Remove the fuel level sensor electrical
connector retaining clip.
- Disconnect the fuel level sensor electrical connector.
- Remove the fuel sensor retaining clip.
- Remove the fuel level sensor.
Installation Procedure
- Install the fuel level sensor.
- Install the fuel level sensor retaining clip.
- Connect the fuel level sensor electrical connector.
- Install the fuel level sensor electrical connector
retaining clip.
- Connect the fuel pump electrical connector.
- Install the sending unit. Refer to
Fuel Sender Assembly Replacement
.