GM Service Manual Online
For 1990-2009 cars only

Radio Front Floor Console Speaker Replacement Subwoofer Speaker

Removal Procedure

  1. Remove the 2 front seats. Refer to Front Seat Replacement - Bucket in Seats.
  2. Move the center console rearward slightly in order to disconnect the wire connector.

  3. Object Number: 882647  Size: SH
  4. Move the console rearward to gain access to the subwoofer speaker.
  5. Remove the 4 retaining bolts from the speaker.
  6. Disconnect the wire connector.
  7. Remove the speaker from the subwoofer assembly.

Installation Procedure

  1. Install the speaker into the subwoofer assembly.

  2. Object Number: 882647  Size: SH
  3. Connect the wire connector.
  4. Notice: Refer to Fastener Notice in the Preface section.

  5. Install the 4 retaining screws.
  6. Ensure the screw follows the same thread in the screw boss so that a new thread is not formed.

    Tighten
    Tighten the screws to 6 N·m (53 lb in).

  7. Move the console forward in order to connect the wire connector.
  8. Install the console to the I/P. Refer to Console Replacement in Instrument Panel, Gages and Console.
  9. Install the 2 front seats. Refer to Front Seat Replacement - Bucket in Seats.