GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2003 🢒 Chevy K Silverado - 4WD 🢒 Body and Accessories 🢒 Interior Trim 🢒 Tool Stowage Compartment Cover Support Replacement

Removal Procedure

    Object Number: 855671 Size: SH
  1. Open the lid of the tool storage box.

    2. Caution: Eye protection must be worn when drilling rivets to reduce the chance of personal injury.

    Important: The storage box lid has spring tension. Be sure to secure the lid when removing the support assembly, if the storage box is not inside the vehicle.

  2. Remove the rivets (1) from the upper lid (2).
  3. Remove the rivets (3) from the lower box (4).
  4. Remove the support assembly from the tool storage box.

Installation Procedure

    Object Number: 855671 Size: SH
  1. Install the support assembly to the storage box.
  2. Install the rivets (3) to the lower box (4).
  3. Install the rivets (1) to the upper lid (2).
  4. Close the lid on the tool storage box.