GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2003 🢒 Chevy K Silverado - 4WD 🢒 Body and Accessories 🢒 Power Take-Off 🢒 Power Take-Off Switch Replacement

Removal Procedure
  1. Remove the I/P cluster bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement in Instrument Panel, Gages, and Console.

    2. Object Number: 884837 Size: SH
  2. Pull out the switch housing from the I/P.
  3. Disconnect the wire connector to the PTO switch.
  4. Remove the PTO switch from the switch housing.

Installation Procedure

    Object Number: 884837 Size: SH
  1. Install the PTO switch to the housing
  2. Connect the wire connector to the switch.
  3. Install the switch housing to the I/P till it clicks into place.
  4. Install the I/P cluster bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement in Instrument Panel, Gages, and Console.