Removal Procedure
- Disconnect the mass air flow/intake air
temperature (MAF/IAT) sensor electrical connector (1).
- Remove the air cleaner outlet duct. Refer to
Air Cleaner Outlet Duct Replacement
.
- Grasp the air filter assembly (1) and pull
the assembly retaining pins (2) away from the grommets (3).
Installation Procedure
- Line up the retaining pins (2) with the
grommets (3) in the bracket.
- Install the air cleaner assembly until the air cleaner is seated fully
on the mounts and is up against the fender apron.
- Install the air cleaner outlet duct. Refer
to
Air Cleaner Outlet Duct Replacement
.
- Connect the MAF/IAT sensor electrical connector (1).