Removal Procedure
- Install a breaker bar with hex-head socket
to the drive belt tensioner bolt.
- Rotate the drive belt tensioner clockwise in order to relieve tension
on the belt.
- Remove the belt (1) from the pulleys and the drive belt tensioner.
- Slowly release the tension on the drive belt tensioner.
- Remove the breaker bar and socket and from the drive belt tensioner bolt.
- Clean and inspect the belt surfaces of all the pulleys.
Installation Procedure
- Route the drive belt (1) around
all the pulleys except the idler pulley.
- Install the breaker bar with hex-head socket to the belt tensioner bolt.
- Rotate the belt tensioner clockwise in order to relieve the tension on
the tensioner.
- Install the drive belt under the idler pulley.
- Slowly release the tension on the belt tensioner.
- Remove the breaker bar and socket from the belt tensioner bolt.
- Inspect the drive belt for proper installation and alignment.