GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Chevy K Silverado - 4WD 🢒 Engine 🢒 Engine Electrical 🢒 12V Battery Positive Cable Replacement - Battery to Battery

Removal Procedure

    Caution: Refer to Battery Disconnect Caution in the Preface section.


    Object Number: 1703364 Size: SH
  1. Disconnect the battery cables. Refer to Battery Cable Disconnect and Connection .
  2. Remove the positive battery cable bolt (3), cable to starter connection and spacer from the right rear underhood battery.
  3. Unsnap the positive battery cable cap from the frame mounted battery.
  4. Remove the positive battery cable bolt.
  5. Remove wiring harness straps and remove the positive cable (4) from the vehicle.

Installation Procedure

    Object Number: 1703364 Size: SH

    Important: Ensure that all battery terminal connections are clean.

  1. Install the positive battery cable (4) and secure with wiring harness straps. Route in the same location as removed.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the positive battery cable bolt to the frame mounted battery.

    3. Tighten
    Tighten the bolt to 17 N·m (13 lb ft).

  3. Snap the positive battery cable cap closed.
  4. Install the positive battery cable bolt (2), cable to the starter connection and spacer.
  5. Install the positive battery bolt cable bolt (3) through the cable and into the positive battery terminal of the right rear underhood battery.

    6. Tighten
    Tighten the bolt to 17 N·m (13 lb ft).

  6. Connect the battery cables. Refer to Battery Cable Disconnect and Connection .