12V Battery Negative Cable Replacement - Frame Mounted Battery for Chevrolet Chevy K Silverado - 4WD 2005

Caution: Refer to Battery Disconnect Caution in the Preface section.




1. Disconnect the battery cables. Refer to Battery Cable Disconnect and Connection .
2. Remove the negative battery cable to frame bolt (8).
3. Remove the negative battery cable (10) from the vehicle.

Important: Ensure that all battery terminal connections are clean.

1. Clean the area around the battery cable to frame bolt.
2. Install the battery cable bolt (8) through the battery cable (10).

Notice: Refer to Fastener Notice in the Preface section.

3. Install a new star washer (9) and tighten bolt into the frame.

Tighten
Tighten the bolt to 25 N·m (18 lb ft).

4. Connect the battery cables. Refer to Battery Cable Disconnect and Connection .