Spare Tire Carrier Latch Adjustment Swing Away

1. Loosen the latch bolts (1).
2. Swing the carrier into the latch pocket so the striker pin touches the latch mechanism.



3. Insert a shim (1) between the striker bottom and the latch pocket.
4. Early carriers with a red striker sleeve will require a 5 mm (0.20 in) shim, all other carriers with a yellow sleeve will require a 3 mm (0.12 in) shim.

Notice: Refer to Fastener Notice in the Preface section.

5. Secure the latch bolts, ensure that the cable tether is facing down.

Tighten
Tighten latch bolts to 97 N·m (72 lb ft).

6. Remove the shim (1). The carrier is now aligned and ready for use.