GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Chevy K Silverado - 4WD 🢒 Suspension 🢒 Tire Pressure Monitoring 🢒 Tire Pressure Monitoring Gage Replacement

Removal Procedure

    Object Number: 1693468 Size: SH
  1. Remove the garnish molding. Refer to Windshield Pillar Garnish Molding Replacement in Interior Trim in 2005 C/K Truck Service Manual.
  2. Remove the push pins (1) from the gage housing.
  3. Pull the housing (2) out enough to remove the gage electrical connectors.
  4. Remove the housing from the vehicle

    5. Object Number: 1693469 Size: SH
  5. Remove the nuts (1) from the back of the gage.
  6. Remove the gage bracket (2).
  7. Remove the gage from the housing.

Installation Procedure

    Object Number: 1693469 Size: SH
  1. Install the gage into the housing opening.
  2. Install the bracket (2) on the back of the voltmeter.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the nuts (1) on the gage studs.

    4. Tighten
    Tighten the bolts to 0.8 N·m (7 lb in).


    Object Number: 1693468 Size: SH
  4. Install the electrical connectors onto the gage.
  5. Install the housing (2) onto the A pillar molding and install the push pins (1).
  6. Remove the garnish molding. Refer to Windshield Pillar Garnish Molding Replacement in Interior Trim in 2005 C/K Truck Service Manual.