GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Chevy K Silverado - 4WD 🢒 Driveline/Axle 🢒 Transfer Case - NVG 261-NP2 🢒 Transfer Case Vent Tube Filter Replacement

Removal Procedure

    Caution: Refer to Vehicle Lifting Caution in the Preface section.


    Object Number: 1701844 Size: SH

    Important: The filter is located on the left side of the vehicle.

  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information in 2005 C/K Truck Service Manual.
  2. Install safety stands.
  3. Remove the clamps (2) holding the filter (1) to the hoses.
  4. Remove the filter and discard.

Installation Procedure

    Object Number: 1701844 Size: SH

    Important: The filter arrow must point toward the axle vent pipe. If replacing the hose, the length of the new hose must match the length of the old hose.

  1. Install the filter (1) to the hoses.
  2. Install hose clamps (2) and hand tighten.
  3. Remove the safety stands.
  4. Lower the vehicle. Refer to Lifting and Jacking the Vehicle in General Information in 2005 C/K Truck Service Manual.