GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Chevy K Silverado - 4WD 🢒 Body 🢒 Frame and Underbody 🢒 Rear Support Beam Replacement

Removal Procedure

    Caution: Refer to Vehicle Lifting Caution in the Preface section.


    Object Number: 1700614 Size: SH
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information in the 2005 C/K Truck Service Manual.
  2. Remove the rear skid plate. Refer to Rear Skid Plate Replacement .
  3. Remove the nuts (1) and bolts (2).
  4. Remove the support beams (3).

Installation Procedure

    Object Number: 1700614 Size: SH
  1. Install the support beams (3).

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the bolts (2) and nuts (1).

    3. Tighten
    Tighten front nuts and and bolts to 35 N·m (26 lb ft).

  3. Install the rear skid plate. Refer to Rear Skid Plate Replacement .
  4. Lower the vehicle. Refer to Lifting and Jacking the Vehicle in General Information in the 2005 C/K Truck Service Manual.