Enhanced Mobility Package Jack Mounting Bracket Replacement In Vehicle Tire Carrier

1. Remove the vehicle jack from the mount.
2. Remove the lower bracket nut (3).
3. Remove the upper bracket bolt (1) and washer.
4. Remove the mounting bracket (2).

1. Install the mount bracket (2) in the mounting position.

Notice: Refer to Fastener Notice in the Preface section.

2. Install the washer and upper bracket bolt (1).

Tighten
Tighten the bolt to 53  N·m (39 lb ft).

3. Install the lower nut (3).

Tighten
Tighten the nut to 53  N·m (39 lb ft).

4. Install the vehicle jack in the mount.

Enhanced Mobility Package Jack Mounting Bracket Replacement Regular Cab

1. Slide the front seat to the forward position.
2. Remove the vehicle jack from the bracket.
3. Remove the bracket fasteners (1).
4. Remove the mounting bracket.

1. Install the mount bracket in the mounting position.

Notice: Refer to Fastener Notice in the Preface section.

2. Install the bracket fasteners (1).

Tighten
Tighten the fasteners to 9 N·m (80 lb in).

3. Install the vehicle jack in the bracket.

Enhanced Mobility Package Jack Mounting Bracket Replacement Extended Cab

1. Raise up the rear seat.
2. Remove the vehicle jack from the bracket.
3. Remove the bracket nuts (2).
4. Remove the bracket bolts (1).
5. Remove the mounting bracket.

1. Install the mount bracket in the mounting position.

Notice: Refer to Fastener Notice in the Preface section.

2. Install the bolts (1) into the rivnut.

Tighten
Tighten the bolt to 9 N·m (80 lb in).

3. Install the nuts (2) onto the stud.

Tighten
Tighten the nut to 13 N·m (10 lb ft).

4. Install the vehicle jack in the bracket.
5. Lower the rear seat.

Enhanced Mobility Package Jack Mounting Bracket Replacement Crew Cab

1. Raise up the rear passenger seat.
2. Remove the vehicle jack from the bracket.
3. Remove the rear bracket bolts (1).
4. Remove the mounting bracket.

1. Install the mount bracket in the mounting position.

Notice: Refer to Fastener Notice in the Preface section.

2. Install the bolts (1).

Tighten
Tighten the bolt to 9 N·m (80 lb in).

3. Install the vehicle jack in the bracket.
4. Lower the passenger rear seat.