License Plate Lamp Replacement LSSV

Important: The bulb is not replaceable but is serviced as a lamp assembly.

1. Ensure the headlamp switch is in the OFF position.
2. Remove the bolts (1) from the lamp.
3. Disconnect the electrical connector.

1. Connect the electrical connector.

Notice: Refer to Fastener Notice in the Preface section.

2. Install the lamp and bolts (1) onto the bumper.

Tighten
Tighten the lamp bolts to 0.8 N·m (7 lb in).

License Plate Lamp Replacement Maintenance Body

1. Ensure the headlamp switch is in the OFF position.
2. Remove the license plate lamp bulb. Refer to License Plate Lamp Bulb Replacement .
3. Pull the rubber lamp housing (1) out of the opening in the bumper.
4. Disconnect the electrical connector.

1. Connect the electrical connector.
2. Install the lamp housing (1) into the opening in the bumper.
3. Install the license plate lamp bulb. Refer to License Plate Lamp Bulb Replacement .

License Plate Lamp Replacement Ambulance Body

1. Ensure the headlamp switch is in the OFF position.
2. Remove the license plate lamp bulb. Refer to License Plate Lamp Bulb Replacement .
3. Pull the rubber lamp housing (1) out of the opening in the bumper.
4. Disconnect the electrical connector.

1. Connect the electrical connector.
2. Install the lamp housing (1) into the opening in the bumper.
3. Install the license plate lamp bulb. Refer to License Plate Lamp Bulb Replacement .