Backup Lamp Replacement Ambulance Body

1. Remove the backup lamp bulb. Refer to Backup Lamp Bulb Replacement .
2. Remove the backup lamp nuts (2).
3. Disconnect the electrical connector (1) from the backup lamp.
4. Remove the lamp assembly.

1. Install the lamp assembly.
2. Connect the electrical connector (1) to the backup lamp.

Notice: Refer to Fastener Notice in the Preface section.

3. Install the nuts (2) for the backup lamp.

Tighten
Tighten screws to 0.8N·m (7 lb in).

4. Install the backup lamp bulb. Refer to Backup Lamp Bulb Replacement .