Removal Procedure
- Remove the instrument cluster bezel. Refer to
Instrument Panel Cluster Trim Plate Bezel Replacement
in Instrument Panel, Gages
and Console in the C/K Pickup Service Manual.
- Remove the fuel gage select switch (1) assembly from
the instrument panel (I/P) housing.
- Disconnect the electrical connector (1) from the switch
assembly.
- Remove the fuel gage select switch from the vehicle.
Installation Procedure
- Connect the electrical connector (1) to the fuel gage
select switch.
- Install the fuel gage select switch assembly (1) into
the I/P housing.
- Install the IP trim bezel to the I/P housing. Refer to
Instrument Panel Cluster Trim Plate Bezel Replacement
in Instrument Panel,
Gages and Console in the C/K Pickup Service Manual.