INSTRUMENT PANEL PAINT PEELING (CLEANING INFORMATION)

Model and Year: 1987-91 C/K TRUCKS

Some of the above subject vehicles may experience loss of paint adhesion on instrument panels. The loss of paint adhesion can occur as a result of a combination of certain types of cleaning compounds applied to the instrument panel after painting and the combination of sunlight and high interior temperatures. Certain cleaning chemicals can result in negative effects on the instrument panel (I/P) and can cause the paint to peel. The I/P should be cleaned with soap and water ONLY. Products containing the following chemicals should not be used to clean the I/P:

Methylene Chloride Ethylene Chloride Tetrachloroethane Alcohols Aromatic Hydrocarbons Aliphatic Hydrocarbons Acetone Ketones Esters Penetrating Oils Silicones Napthas Propylene Glycols Plasticizers

Some after market products used to increase the gloss of the I/P contain some of the products listed above. It is important to use only those solutions recommended for cleaning the identified surfaces. As a general rule, the following guidelines can be used:

Vinyl and Non-painted Plastic - Use vinyl and plastic cleaners.

Rubber - Use rubber cleaners.

Painted Plastic Surfaces - Use only mild detergents.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.