Control Valve Assembly and Accumulator Housing Installation for Chevrolet Chevy MD Steel Tilt (W Model) 1996

Assemble the accumulator housing. Refer to Control Valve Body Assembly Assemble .

Install the accumulator housing and wiring harness. Refer to Control Valve Body Assembly Assemble .

1. Install the transmission oil pan and the transmission oil filter. Refer to Automatic Transmission Fluid/Filter Changing .
2. Raise the transmission if the transmission was lowered for clearance. Refer to Transmission Replacement .
3. Remove the safety stands.
4. Lower the vehicle.



5. Connect the battery negative cable assembly to the battery negative terminal.

Tighten
Tighten the terminal bolt to 15 N·m (11 lb ft).