GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Chevy MD Steel Tilt (W Model) 🢒 Transmission/Transaxle 🢒 Automatic Transmission - 4L80-E/4L85-E 🢒 Forward Clutch Assembly Installation

Tools Required

    • J 36850 Transjel® Lubricant
    • J 38358-A Forward Clutch Assembly Remover/Installer

    Object Number: 335049 Size: SH
  1. Align the direct clutch plates in order to aid in the installation of the forward clutch housing assembly (602).

    2. Important: Following installation of the forward clutch housing assembly (602), the distance between the top of the speed sensor ring and the pump gasket surface should be approximately 98-99 mm (3.85-3.89 in).

  2. Using the J 38358-A , install the forward clutch housing assembly (602).
  3. Install the overdrive carrier/forward clutch thrust bearing assembly (601) (silver side up) onto the forward clutch housing assembly (602). Retain with J 36850 or equivalent.

Tools Required

    • J 38358-A Forward Clutch Assembly Remover/Installer
    • J 36850 Assembly Lubricant

    Object Number: 335049 Size: SH
  1. Align the direct clutch plates in order to aid in the installation of the forward clutch housing assembly (602).

    2. Important: Following installation of the forward clutch housing assembly (602), the distance between the top of the speed sensor ring and the pump gasket surface should be approximately 98-99 mm (3.85-3.89 in).

  2. Using the J 38358-A , install the forward clutch housing assembly (602).
  3. Install the overdrive carrier/forward clutch thrust bearing assembly (601) (silver side up) onto the forward clutch housing assembly (602). Retain with J 36850 or equivalent.