Tools Required
| • | J 24396
Intermediate Clutch Pack Alignment Tool |
| • | J 38733
Direct Clutch Assembly Remover/Installer |
- Using the
J 24396
, align the
intermediate clutch plates.
- Apply compressed air through the center support bolt hole to apply the intermediate clutch. Continue applying compressed air to hold the intermediate clutch plates in place until the direct clutch assembly is installed.
- Remove the
J 24396
.
- Using the
J 38733
, install the direct clutch housing assembly
(623) into the transmission case. Rotate the direct clutch housing assembly slightly in each direction to ease installation.
- Remove the
J 38733
.
Tools Required
| • | J 24396 Intermediate
Clutch Pack Alignment Tool |
| • | J 38733 Direct
Clutch Assembly Remover/Installer |
- Using the
J 24396
, align the intermediate clutch plates.
- Apply compressed air through the center support bolt hole to apply
the intermediate clutch. Continue applying compressed air to hold the intermediate
clutch plates in place until the direct clutch assembly is installed.
- Remove the
J 24396
.
- Using the
J 38733
,
install the direct clutch housing assembly (623) into the transmission case.
Rotate the direct clutch housing assembly slightly in each direction to ease
installation.
- Remove the
J 38733
.
