Exhaust Brake Ball Joint for Chevrolet Chevy P52 RV/Van Chassis 1997

CAUTION:: Always wear protective goggles and gloves when removing exhaust system parts as falling rust and sharp edges from worn exhaust components could result in serious personal injury.

When removing exhaust components, the accumulation of dirt and corrosion can make work difficult. Using a penetrating oil on the threads can assist in the removal of these components.



1. Remove the actuator. Refer to Exhaust Brake Actuator.
2. Disconnect the wire retaining clip from the ball joint.
3. Detach the ball joint from the assembly.

1. Install a new ball joint cap and the wire retaining clip.
2. Install the actuator. Refer to Exhaust Brake Actuator.