GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1997 🢒 Chevy P62 Commercial Chassis 🢒 Brakes 🢒 Hydraulic Brakes 🢒 Master Cylinder Reservoir Replacement

Removal Procedure

    Object Number: 32132 Size: SH
  1. Block the vehicle's wheels.
  2. Set the parking brake.
  3. Drain the reservoir.
  4. Disconnect the hoses from the reservoir.
  5. Cap the hoses in order to prevent dirt from entering the system.
  6. Remove the nuts and the bolts.
  7. Remove the reservoir assembly from the vehicle.

Installation Procedure

    Object Number: 32132 Size: SH
  1. Install the reservoir to the vehicle.
  2. Install the bolts and the nuts.

    3. Tighten
    Tighten the bolts to 60 N·m (45 lb ft).

  3. Connect the hoses to the reservoir.
  4. Fill the reservoir.
  5. Bleed the system. Refer to Bleeding Hydraulic System in this section.
  6. Remove the wheel blocks.