GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1997 🢒 Chevy P62 Commercial Chassis 🢒 Steering 🢒 Steering Wheel and Column 🢒 Hazard Warning Knob

Removal Procedure

    Object Number: 30671 Size: SH
  1. Remove the screw and the knob assembly.

    2. Object Number: 30673 Size: SH
  2. Disassemble the screw button.
  3. Remove the spring and the collar.

Installation Procedure

    Object Number: 30673 Size: SH
  1. Install the spring and the collar.
  2. Assemble the screw button.

    3. Object Number: 30671 Size: SH
  3. Install the screw until it is fully seated, not stripped.

    4. Tighten
    Tighten the screw to 0.7 N·m (6 lb in).

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  4. Install the knob assembly.