Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 |
Does the chime sound? | -- | ||
2 |
Does the test lamp light? | -- | ||
3 | Replace the audio alarm module. Is the repair complete? | -- | System OK | -- |
4 | Locate and repair the open in CKT 39 (PNK) between the IP fuse block and the audio alarm module. Is the repair complete? | -- | System OK | -- |
5 |
Is there continuity? | -- | ||
6 | Locate and repair the short to ground in CKT 80 (LT GRN) between the audio alarm module and connector C266. Is the repair complete? | -- | System OK | -- |
7 | Install the audio alarm module in the convenience center. Does the chime sound? | -- | ||
8 | Replace the audio alarm module. Is the repair complete? | -- | System OK | -- |
9 |
Is there continuity? | -- | ||
10 | Replace the key-in warning buzzer switch. Is the repair complete? | -- | System OK | -- |
11 | Using a self-powered test lamp, test for continuity between connector C266 cavities B3 and B4. Is there continuity? | -- | ||
12 | Replace the key-in warning buzzer switch. Is the repair complete? | -- | System OK | -- |
13 | Using a self-powered test lamp, test for continuity between connector C266 cavity B4 and ground. Is there continuity? | -- | ||
14 | Replace the key-in warning buzzer switch Is the repair complete? | -- | System OK | -- |
15 |
Is there continuity? | -- | ||
16 | Locate and repair the open in CKT 159 (TAN) between connector C266 and the driver door jamb switch. Is the repair complete? | -- | System OK | -- |
17 | Replace the driver door jamb switch. Is the repair complete? | -- | System OK | -- |
