1. Remove the audio alarm module.
2. Disconnect the steering column harness connector C266.
3. Using a DMM, test for continuity between the audio alarm terminal J3 and connector C266 terminal B3.

Is there continuity?

--

Go to Step 3

Go to Step 2

Locate and repair the open in CKT 80 (LT GRN) between the audio alarm module and connector C266.

Is the repair complete?

--

System OK

--

1. Place the ignition key in the ignition switch.
2. Using a DMM, test for continuity between connector C266 terminals B3 and B4.

Is there continuity?

--

Go to Step 5

Go to Step 4

Replace the key-in warning buzzer switch.

Is the repair complete?

--

System OK

--

1. Disconnect the connector at the driver door jamb switch.
2. Using a DMM, test for continuity between connector C266 terminal B4 and the driver door jamb switch connector terminal C.

Is there continuity?

--

Go to Step 7

Go to Step 6

Locate and repair the open in CKT 159 (TAN) between connector C266 and the driver door jamb switch.

Is the repair complete?

--

System OK

--

1. Open the driver door.
2. Using a DMM, test for continuity between terminals C and B of the driver door jamb switch connector.

Is there continuity?

--

Go to Step 9

Go to Step 8

Replace the driver door jamb switch.

Is the repair complete?

--

System OK

--

Use a J 39200 Digital MultiMeter in order to test for continuity between the driver door jamb switch connector terminals B and ground G200.

Is there continuity?

--

Go to Step 10

Go to Step 11

Replace the audio alarm module.

Is the repair complete?

--

System OK

--

Locate and repair the open in CKT 150 (BLK) between the driver door jamb switch and ground G200.

Is the repair complete?

--

System OK

--