Name | Location | Locator View | Connector End View |
|---|---|---|---|
Brake Pressure Warning Switch | On rear of EBCM casting, near Brake Master Cylinder, at LF Wheelhousing | ||
Data Link Connector (DLC) | Under LH of IP, LH of Steering Column, mounted to bottom of Knee Bolster | Data Link Communications Component Views in Data Link Communications | Data Link Communications Connector End Views in Data Link Communications |
Daytime Running Lamps (DRL) Module | Under the left side of the IP, taped to the IP harness | Lighting Systems Component Views in Lighting Systems | Lighting Systems Connector End Views in Lighting Systems |
Electronic Brake Control Module (EBCM) | Near Brake Master Cylinder, at LF Wheelhousing | ||
Electronic Variable Orifice (EVO)/Passlock Module | Under the center of the IP | Theft Deterrent System Component Views in Theft Deterrent | Theft Deterrent System Connector End Views in Theft Deterrent |
Front Axle Actuator | RF of Front Drive Axle | Transfer Case Control Component Views in Transfer Case | Transfer Case Control Connector End Views in Transfer Case |
Instrument Cluster | On the upper left end of the IP, above the steering column | Instrument Panel, Gages, and Console Component Views in Instrument Panel and Console | Instrument Panel, Gages, and Console Connector End Views in Instrument Panel and Console |
IP Fuse Block | To the left of the IP, near the left front door jamb switch | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Powertrain Control Module (PCM) (Diesel) | Under RH end of IP, above Blower Motor, behind IP Compartment Box | Engine Controls Component Views in Engine Controls | Powertrain Control Module Connector End Views in Engine Controls |
Stoplamp Switch | At the top of the brake pedal | Lighting Systems Component Views in Lighting Systems | Lighting Systems Connector End Views in Lighting Systems |
Transfer Case Shift Control Module (Auto 4WD) | Under LH of IP, near Convenience Center | Transfer Case Control Component Views in Transfer Case | Transfer Case Control Connector End Views in Transfer Case |
Underhood Fuse Block | In the left rear side of the engine compartment, on the fender | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Vehicle Control Module (VCM) (Gas) | Engine Compartment, near EBCM | Engine Controls Component Views in Engine Controls | VCM Connector End Views (5.0L/5.7L) VCM Connector End Views (7.4L) |
Vehicle Speed Sensor (w/RWD) | At the LR of the transmission | Engine Controls Component Views in Engine Controls | Engine Controls Connector End Views in Engine Controls |
Vehicle Speed Sensor (w/Selectable 4WD) | At the LR of the transfer case | Engine Controls Component Views in Engine Controls | Engine Controls Connector End Views in Engine Controls |
Wheel Speed Sensor, LF | Left front wheel | ||
Wheel Speed Sensor, RF | Right front wheel | ||
C100 | IP harness inline to the Engine harness, in the left rear side of the engine compartment, at the bulkhead | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C120 | Engine harness, inline to the 4WD Transfer Case Harness, in the rear of the engine, near the transmission | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C200 | IP harness inline to the Engine harness, behind the right side of the IP, near the heater motor, in foam wrap | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C227 | IP harness inline to the Stoplamp Switch harness, located at the steering column support bracket | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
DIODE 1 | In the underhood fuse-relay center, LR of the engine compartment, on the fender | Harness Routing Views in Wiring Systems | -- |
G105 (Gas) | On the right front side of the engine block | Power and Grounding Component Views in Wiring Systems | -- |
G105 (Diesel) | Right Rear of the cylinder head, cylinder #7 intake bolt | Power and Grounding Component Views in Wiring Systems | -- |
P101 | In the right rear side of the engine compartment, at the bulkhead | Harness Routing Views in Wiring Systems | -- |
S107 (5.0L, 5.7L) | Engine harness, approx. 20 cm (8 in) from EGR valve breakout, toward taillamp harness breakout | -- | -- |
S107 (6.5L, HD) | Engine harness, approx. 40 cm (15 in) from EBCM breakout, toward Transmission harness breakout | -- | -- |
S107 (7.4L) | Engine harness, approx. 18 cm (7 in) from EBCM breakout, toward tthe EGR harness breakout | -- | -- |
S111 (5.0L, 5.7L) | Engine harness, approx. 10 cm (4 in) from the EBCM breakout, after the taillamp harness breakout | -- | -- |
S111 (6.5L | Engine harness, approx. 11 cm (4.5 in) from the EBCM breakout toward the Engine Jumper harness breakout | -- | -- |
S111 (7.4L) | Engine harness, approx. 7 cm (2.5 in) from the EBCM breakouts, toward the PCM harness | -- | -- |
S147 (Gas) | Engine harness, approx. 5 cm (2 in) from EGR valve breakout, toward taillamp harness breakout | -- | -- |
S147 (Diesel) | Engine harness, approx. 4 cm (1.5 in) from starter motor solenoid breakout | -- | -- |
S150 | Engine harness, approx. 13 cm (5 in) from the EBCM harness breakout, towards EBCM | -- | -- |
S151 | Engine Harness, approx. 7 cm (2.5 in) inside EBCM harness breakout | -- | -- |
S152 (5.0L, 5.7L, 7.4L) | Engine harness, approx. 7 cm (2.5 in) from the EBCM breakout, toward VCM connector breakout | -- | -- |
S152 (6.5L) | Engine harness, approx. 4 cm (1.5 in) from the IP harness breakout, toward the P101 | -- | -- |
S157 (6.5L) | Engine harness, approx. 50 cm (19.5 in) before EBCM harness breakout | -- | -- |
S157 (7.4L) | Engine harness, approx. 40 cm (16 in) before EBCM harness breakout | -- | -- |
S213 | IP harness, approx. 4 cm (1.5 in) from steering column harness breakout, towards the DLC | -- | -- |
S222 | In the IP harness, approx. 20 cm (8 in) from the radio harness breakout, toward C200 | -- | -- |
S280 | In the IP harness, approx. 5 cm (2 in) from the DLC breakout, towards DLC connector | -- | -- |
S314 (K300) | At the selectable 4WD harness, approx. 5 cm (2 in) from the transfer case relay breakout, toward the front axle switch | -- | -- |
