High Beam Indicator Inoperative Daytime Running Lamps
Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
DEFINITION: This diagnostic procedure should only be used to diagnose the high beam indicator only if the high beam headlamps are operational. | ||||
1 | Did you perform the DRL System Check? | -- | Go to Step 2 | |
2 |
Does the test lamp light? | -- | Go to Step 3 | Go to Step 4 |
3 |
Does the test lamp light? | -- | Go to Step 5 | Go to Step 6 |
4 | Repair the open in CKT 451 (BLK/WHT) between the instrument panel connector and ground. Is the repair complete? | -- | -- | |
5 | Inspect the high beam indicator beam bulb in order to determine if the bulb is operative. Is the bulb operative? | -- | Go to Step 7 | Go to Step 8 |
6 | Repair the open in CKT 11 (LT GRN) between the instrument cluster connector and splice S225. Is the repair complete? | -- | -- | |
7 | Replace the instrument cluster. Is the repair complete? | -- | -- | |
8 | Replace the high beam indicator bulb. Is the repair complete? | -- | -- | |
High Beam Indicator Inoperative Headlamps
Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Headlight System Check? | -- | Go to Step 2 | Go to Headlight System Check |
2 |
Does the test lamp light? | -- | Go to Step 3 | Go to Step 4 |
3 | Connect a J 35616-200 self-powered test lamp between the instrument cluster connector, cavity 4 for CKT 451 (BLK/WHT), and ground. Does the test lamp light? | -- | Go to Step 5 | Go to Step 6 |
4 | Repair the open in CKT 11 (LT GRN) between splice S125 and the instrument cluster. Is the repair complete? | -- | Go to Headlight System Check | -- |
5 | Is the high beam indicator bulb good? | -- | Go to Step 7 | -- |
6 | Repair the open in CKT 451 (BLK/WHT) between the instrument cluster and ground G103 or ground G104. Is the repair complete? | -- | Go to Headlight System Check | -- |
7 | Replace the instrument cluster. Is the repair complete? | -- | Go to Headlight System Check | -- |
