Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Interior Lamps System Check? | -- | Go to Step 2 | |
2 | Turn the headlamp and the panel dimmer switch to the PARK position. Are the park lamps and all of the component illumination lamps inoperative? | -- | Go to Step 3 | Go to Step 4 |
3 | Connect a J 35616-200 test lamp between the headlamp and the panel dimmer switch CKT 9 (BRN) cavity 5 to ground. Does the test lamp light? | -- | Go to Step 12 | Go to Step 9 |
4 | Connect a J 35616-200 test lamp between CKT 9 (BRN) at the affected illumination lamp(s) and ground. Does the test lamp light? | -- | Go to Step 5 | Go to Step 7 |
5 | Connect a J 35616-200 test lamp between CKT 150 (BLK) at the affected illumination lamp(s) and B+. Does the test lamp light? | -- | Go to Step 6 | Go to Step 8 |
6 | Replace the affected component illumination lamp(s). Is the repair complete? | -- | -- | |
7 | Repair the open in CKT 9 (BRN) between the headlamp and the panel dimmer switch and the affected component illumination lamp(s). Is the repair complete? | -- | -- | |
8 | Repair the open in CKT 150 (BLK) between the affected lamp(s) and ground. Is the repair complete? | -- | -- | |
9 | Connect a J 35616-200 test lamp between the headlamp and the panel dimmer switch CKT 240 (ORN) cavity H and ground. Does the test lamp light? | -- | Go to Step 10 | Go to Step 11 |
10 | Replace the headlamp and the panel dimmer switch. Is the repair complete? | -- | -- | |
11 | Repair the open in CKT 240 (ORN) between the IP fuse block and the headlamp and panel dimmer switch. Is the repair complete? | -- | -- | |
12 | Repair the open in CKT 9 (BRN) between the headlamp and the panel dimmer switch and splice S210. Is the repair complete? | -- | -- |
