Step | Action | Value(s) | Yes | No | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | Was the Hydraulic Brake System Diagnostic Check performed? | -- | ||||||||||||||||
2 | Inspect the disc brake pads and brake shoe linings for the following conditions:
Refer to Brake Pad Inspection in Disc Brakes. Do any of the above conditions apply? | -- | ||||||||||||||||
3 | Replace the brake linings. Refer to the appropriate procedure:
Is the repair complete? | -- | -- | |||||||||||||||
4 | Inspect the brake rotors for the following conditions:
Refer to the following procedures:
Do any of the above conditions apply? | -- | ||||||||||||||||
5 |
Important: If refinishing the brake rotor results in a thickness that is less than the thinnest (Refinishing) thickness, replace the rotor. Refer to Front Brake Rotor Replacement or Rear Brake Rotor Replacement in Disc Brakes. Is the repair complete? | -- | -- | |||||||||||||||
6 | Inspect brake assembly for loose, broken or missing attachments. Are there any loose, broken or missing attachments? | -- | ||||||||||||||||
7 | Tighten or replace the loose, broken or missing brake assembly components. Is the repair complete? | -- | -- | |||||||||||||||
8 | Verify proper brake system operation. Does the brake system operate properly? | -- | System OK |
