Did you perform the Instrument Cluster Diagnostic System Check?

--

Go to Step 2

Go to Diagnostic System Check - Instrument Cluster

1. Turn ON the ignition, with the engine OFF.
2. Move the shift lever through the range of gears.

Does the PRNDL display identify the correct gear position?

--

Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems

Go to Step 3

1. Install a scan tool.
2. Place the shift lever in the PARK position.
3. With the scan tool, observe the Park Switch parameter in the IPC data list.

Does the scan tool display closed?

--

Go to Step 4

Go to PRNDL Display Park Indicator Inoperative

With the scan tool, command each parameter ON in the PRNDL Display Special Functions.

Does the PRNDL display identify each gear position correctly?

--

Go to Transmission Range Switch Circuit Electrical in Automatic Transmission- 4L60E or Transmission Range Switch Circuit Electrical in Automatic Transmission- 4L80E

Go to Step 5

Replace the instrument cluster. Refer to Instrument Cluster Replacement .

Did you complete the replacement?

--

Go to Step 6

--

Operate the system in order to verify the repair.

Did you find and correct the condition?

--

System OK

Go to Step 2