Rear Door Weatherstrip Replacement for Chevrolet Chevy Suburban - 2WD 2000

Tools Required

J 38778 Door Trim Pad Clip Remover

1. Open the door.



2. Using the J 38778 , remove the weatherstrip from the mounting surface.

Important: Apply the weatherstrip in an environment that is free from dust or dirt that could come into contact with the adhesive backing. Foreign material may cause improper adhesion.

1. Install the weatherstrip to the mounting surface by completing the following steps:

1.1.	Peel off the backing paper.

1.2.	Press the retainers into place.

2. Close the door.