Did you review the General Description and perform the necessary inspections?

Go to Step 2

Go to Symptoms - Suspension General Diagnosis

Verify that the ride is too soft.

Does the vehicle ride normally?

System OK

Go to Step 3

Inspect the tires for the proper inflation pressure. Refer to Tire Inflation Pressure Specifications in Maintenance and Lubrication.

Is the tire inflation pressure correct?

Go to Step 5

Go to Step 4

Inflate the tires to the correct pressure.

Did you complete the repair?

Go to Step 5

--

1. Inspect the vehicle trim height. Refer to Trim Height Inspection .
2. Repair as necessary.

Did you complete the inspection/repair?

Go to Step 6

--

Inspect the following suspension components for wear or damage.

Refer to Suspension Strut and Shock Absorber Testing - On Vehicle .

Are any of the components the worn or damaged?

Go to Step 7

Go to Step 8

Replace all of the worn or damaged components.

Did you complete the repair?

Go to Step 8

--

1. Inspect the real time damping system. Refer to Diagnostic System Check - Real Time Damping in Real Time Damping (RTD).
2. Repair as necessary.

Did you complete the inspection/repair?

Go to Step 9

--

1. Inspect the selectable ride system. Refer to Symptoms - Selectable Ride in Selectable Ride.
2. Repair as necessary.

Did you complete the inspection/repair?

Go to Step 10

--

Drive the vehicle in order to verify the repair.

Did you correct the condition?

System OK

Go to Step 3