Removal Procedure
- Separate the front of
the console (1) from the headliner.
- Push the assembly rearward and pull down in order to access the
retaining tabs.
- Remove the HVAC control assembly (2) by releasing the tabs
at the rear of the control and push out from the rear.
- Disconnect the electrical connector (3).
Installation Procedure
- Connect the electrical
connector (3).
- Install the HVAC control assembly (2) to the console (1).
- Install the console (1) to the headliner.
- Calibrate the HVAC module actuators. Refer to
Actuator Recalibration
in HVAC Systems - Automatic.