Rear License Plate Lamp Replacement W/ Step Bumper

1. Ensure the headlamp switch is in the OFF position.



2. Remove the lens from the lamp assembly.
3. Remove the bulb.

1. Install the bulb.
2. Install the lens to the lamp assembly.
3. Inspect the operation.

Rear License Plate Lamp Replacement Pickup W/O Bumper

1. Ensure the headlamp switch is in the OFF position.



2. Remove the lens from the lamp assembly (2).
3. Remove the bulb.

1. Install the bulb.
2. Install the lens to the lamp assembly (2).
3. Install the wiring (3) to the back of the lens assembly.