GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2001 🢒 Chevy Suburban - 2WD 🢒 Body and Accessories 🢒 Roof 🢒 Power Sunroof Module Replacement

Removal Procedure
  1. The sunroof glass panel must be in the closed position.
  2. Remove the headliner. Refer to Headlining Trim Panel Replacement in Interior Trim.
  3. Remove the sunroof glass panel. Refer to Sunroof Glass Panel Replacement .
  4. Remove the drain channel. Refer to Roof Drain Channel Replacement .
  5. Remove the sunshade. Refer to Sunroof Sunshade Replacement .

    6. Object Number: 582982 Size: SH
  6. Remove the 9 bolts retaining the module to the roof.
  7. Remove the module from the vehicle.

Installation Procedure

    Object Number: 582982 Size: SH
  1. Install the module to the vehicle.

    2. Object Number: 730181 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Loosely install the 9 bolts retaining the module to the roof .

    3. Use a drill bit to align the 2 holes (6 and 7).

    Tighten
    Tighten the bolts in the sequence shown to 9 N·m (80 lb in).

  3. Install the sunshade. Refer to Sunroof Sunshade Replacement .
  4. Install the drain channel. Refer to Roof Drain Channel Replacement .
  5. Install the sunroof glass panel. Refer to Sunroof Glass Panel Replacement .
  6. Install the headliner. Refer to Headlining Trim Panel Replacement in Interior Trim.
  7. Inspect the operation of the sunroof.