GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2002 🢒 Chevy Suburban - 2WD 🢒 Body and Accessories 🢒 Body Rear End 🢒 Cargo Cover Compression Latch Replacement

Removal Procedure
  1. Lower the end gate.
  2. Remove the cargo cover assembly from the vehicle.

    3. Object Number: 801966 Size: SH
  3. Remove the latch fastener.

  4. Remove the latch from the cargo cover.

Installation Procedure

    Object Number: 801966 Size: SH
  1. Install the latch to the cargo cover.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the fasteners to the latch.

    3. Tighten
    Tighten the fasteners to 6 N·m (53 lb in).

  3. Install the rear compartment cover assembly to the vehicle.