PARK/NEUTRAL TO REVERSE SHIFT FEEL (REPAIR DESCRIBED
Model and Year: 1981-88 TRUCKS, G AND P VANS WITH 400/475 TRANSMISSIONS
TO: ALL CHEVROLET DEALERS
This bulletin cancels and replaces Dealer Service Bulletin 88-390-7A, dated January, 1989, of which all copies should be discarded.
New case assembly package part numbers are included in this bulletin.
Section I of this bulletin contains service parts information concerning park/neutral to reverse engagement shift feel on 1987-1988 vehicles with a GVWR of 10,000 lbs and under.
Section II contains service parts information for Case replacement on all 1981-1986 transmissions. The Service case is the same as described under Section I except the Orifice Cup Plug and Checkball are not required. This change will not correct a harsh reverse engagement shift feel, on 1981-1986 transmissions. SECTION I --------- TRANSMISSION APPLICATIONS: SUBJECT: -------------------------- -------- 1987 Through 1988 THM 400/475 Park/Neutral To Reverse HYDRA-MATIC 3L80/3L80-HD Shift Feel 1987 Thru 1988 Model Years
TRANSMISSION MODELS: VEHICLE APPLICATIONS: -------------------- ---------------------- FDA, FFA, FMA, FTA, FWA, FZA, 1987-1988 C,K,R,V Trucks LKA, LMA, LTA, LUA, LWA, LZA, 1987-1988 G - Van FJA, FNA, FPA, FUA, FYA, LBA , (GVWR of 10,000 lbs. and LDA, LHA, LJA, FCA, LFA, LRA, under) LSA, LCA
SECTION I COVERS:
Service and Parts Information Concerning Park or Neutral to Reverse engagement shift feel on vehicles with a Gross Vehicle Weight Rating (GVWR) of 10,000 lbs. and under. Included are: Control Valve Assembly, valve Body Gaskets, Valve Body Spacer Plate, case Assembly with an additional Checkball and Orificed Cup Plug.
NOTICE: The new Case Assembly, Control Valve Assembly, Gaskets, and Checkball will be included on all THM 400/475/ HYDRA-MATIC 3L80/3L80-HD models. However, only the vehicles that have GVWR of 10,000 lbs. and under will have the new garage shift Spacer Plate and Orifice Cup Plug. The vehicles with GVWR over 10,000 lbs. have increased clutch capacity requirements which may result in burned clutches if this garage package is installed.
Vehicles with GVWR over 10,000 lbs. cannot be updated with this package.
DATE OF CHANGE: (Figure 1) --------------- Beginning November 23, 1987 (Julian Date 327) all THM 400/HYDRA-MATIC 3L80 transmissions with a GVWR Of 10,000 lbs. and under were built with a new reverse engagement package.
SERVICE ACTION:
To service a 1987-1988 THM 400/HYDRA-MATIC 3L80 transmission built prior to November 23, 1987 (Julian Date 327) it is necessary to replace the Case Assembly, Spacer Plate, and valve body gaskets listed under "Service Parts Information". (Refer to Figures 2 through 6.)
NOTICE: When installing the Park/Neutral to Reverse engagement shift feel package on a past model transmission built prior to November 23, 1987 (Julian Date 327), the original Control Valve Assembly can be used.
SERVICE PARTS INFORMATION:
Model Applications Part No. Part Description (1987 and 1988 only) -------- ----------------- -------------------- 8629970 Package-Case Assembly FDA, FMA, FTA, FZA, Case Assembly-Complete LMA, LTA, LUA, LZA, Ball FJA, FPA, FUA, FYA, Plug-Orifice Cup .096" LBA, LCA, LHA, LJA (copper)
8629971 Package-Case Assembly LDA, LFA, LKA, LRA Case Assembly-Complete LSA, LWA, FFA, FNA, Ball FWA, FCA Plug-Orifice Cup .096"(copper) Plug-Orifice Cup .089"(blue use on 4.3L engines only)
8670447 Gasket-Valve Body/Spacer Plate All Models
8670458 Gasket-Case/Spacer All Models
* Plate-Valve Body Spacer
* Refer to the Service Parts catalog for correct usage on spacer plates.
Parts are currently available from GMSPO.
SERVICE MANUAL REFERENCE:
Please make note of these changes which are not in your 1988 service manual. Refer to the THM 400/475, Unit Repair Section of the Service Manual for proper Case, Control Valve Assembly, Spacer Plate, and Gasket replacement procedures. SECTION II ----------- TRANSMISSION APPLICATIONS: SUBJECT: -------------------------- --------- 1981 Through 1986 THM 400/475 Service And Parts HYDRA-MATIC 3L80/3L80-HD Information on Case Assemblies For 1981 Through 1986 Model Years
TRANSMISSION MODELS: VEHICLE APPLICATIONS:
See Attachment 1981-86 C,K,P - Trucks 1981-86 G - Van TEXT ZONE
BULLETIN COVERS:
Service Parts and Information for Case replacement procedures for transmissions built from 1981-1986. New Case requires different Spacer Plate and Gaskets.
SERVICE ACTION: (Reference Attachment) ---------------- When ordering a service transmission Case for a 1981 through 1986 model year, you will receive a service package that is the same as for a 1987 or 1988 THM 400/475/HYDRA-MATIC 3L80/3L80-HD.
When installing this Case package in a transmission built during 1981 through 1986 model year the original Control Valve Assembly can be reused. The Spacer Plate and Gaskets must be changed. The Checkball and Orifice Cup Plug contained in the service package are not reuqired for 1981 through 1986 model year transmissions and should be discarded. Refer to Service Parts Information.
Important: These service packages are to be ordered whenever a transmission Case replacement is necessary. This will not correct a harsh Reverse engagement shift feel on any 1981 through 1986 model year THM 400/475/HYDRA-MATIC 3L80/3L80-HD transmission.
CASE ASM TRANSMISSION MODEL AND YEAR PART # 1986 1985 1984 1983 1982 1981 ---- ---- ---- ---- ---- ---- 8629970 FAA FBA 5FA 5FB 4FA 4FB 3FA 3FB 9FA 9FB 8FA 8FB FDA FJA 5FC 5FD 4FC 4FD 3FC 3FD 9FC 9FD 8FF 8FJ FLA FMA 5FJ 5FL 4FE 4FI 3FE 3FI 9FE 9FI 8FL 8FM FPA FQA 5FM 5FP 4FJ 4FL 3FJ 3FM 9FJ 9FL 8FP 8FQ FTA FXA 5FQ 5FT 4FM 4FP 3FP 3FQ 9FM 9FP 8FR 8FT FIA FSA 5FX 5FI 4FQ 4FS 3FS 3FT 9FQ 9FS 8FY FCA LSA 5FS 4FT 4FU 3FU 3FX 9FT 9FX FPA 4FX 4MF
8629971 FKA FNA 5FF 5FR 4FF 4FH 3FF 3FH 9FF 9FH 8FH 8FO FWA FZA 5FV 5RV 4FK 4FN 3FK 3FN 9FK 9FN 8FN 8FW FFA FRA 5VR 5VS 4FR 4FV 3FR 3FV 9FW 9FY FVA FYA 5VV 5FK 4FW 4FY 3FW 3FY 9FZ 9RV LRA 5FN 5FW 4FZ 3FZ 5FZ
8627961 4AN
SPACER PLATE PART NO. 8670448 FAA FBA 5FA 5FB 4FA 4FB 3FA 3FB 9FA 9FB 8FA 8FB FIA FJA 5FC 5FI 4FC 4FE 3FC 3FE 9FC 9FE 8FF 8FH FKA FLA 5FJ 5FK 4FH 4FI 3FH 3FI 9FH 9FI 8FJ 8FL FMA FNA 5FL 5FM 4FJ 4FK 3FJ 3FK 9FJ 9FK 8FM 8FN FQA FTA 5FN 5FQ 4FL 4FM 3FM 3FN 9FL 9FM 8FO 8FQ FWA FZA 5FT 5FW 4FN 4FQ 3FQ 3FT 9FN 9FQ 8FR 8FT FVA FCA 5FZ 5RV 4FT 4FW 3FW 9FT 9FW 8FW 8FY FYA LRA 5VR 5VS 4FZ 4MF 3FZ 9FZ 9RV LSA 5VV
8670452 FDA FPA 5FD 5FF 4FD 4FF 3FD 3FF 9FD 9FF 8FP FSA FXA 5FP 5FR 4FP 4FR 3FP 3FR 9FP 9FS FFA FRA 5FS 5FV 4FS 4FU 3FS 3FU 9FX 9FY FVA 5FX 4FV 4FX 3FV 3FX 4FY 4AN 3FY
GASKET-VALVE BODY/SPACER PLATE PART # 8670447 ALL MODELS
GASKET-CASE/SPACER PLATE PART # 8670458 ALL MODELS
Parts are currently available from GMSPO.
Important: When ordering Case Packages 8629970, 8629971 or 8627961, order the appropriate Spacer Plate and Gaskets at the same time.
SERVICE MANUAL REFERENCE:
Refer to the THM 400/475 Unit Repair Section of the Service Manual for the proper replacement procedures. This information is not contained in any 1988 or prior model year Service Manual. Please make note of this information for future use.
Use applicable Labor Operation and Time
General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.
