GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1998 🢒 Chevy Suburban - 4WD 🢒 Driveline/Axle 🢒 Transfer Case - NVG 246-NP8 (Two Speed Automatic) 🢒 Transfer Case Shift Control Switch Replacement

Transfer Case Shift Control Switch Replacement Automatic 4WD

Removal Procedure
  1. Remove the automatic transfer case switch from the instrument panel.
    2. • Pull the tabs on the rear of the switch in.
    • Pull the switch straight out from the panel.
  2. Remove the electrical connector from the automatic transfer case switch.

Installation Procedure
  1. Install the electrical connector to the automatic transfer case switch.
  2. Install the automatic transfer case switch into the instrument panel.
  3. Ensure the automatic transfer case switch locks into the instrument panel.